V-MAXX
V-MAXX Lowering springs TOYOTA PROACE LONG PANEL VAN (35 TO 105)292.56€ VAT included
V-MAXX
V-MAXX Lowering springs TOYOTA PROACE LONG PANEL VAN (35 TO 105)292.56€ VAT included
KW
KW Top mount BMW (19000763)248.98€ VAT included
Motordrome Design
Side Skirts Subaru Impreza Mk2 (2000-2007)167.64€ VAT included
Maxton Design
Maxton Design Front Splitter Porsche Boxster 987 (PO-BO-S-987-FD1G)197.38€ VAT included
Concaver
Concaver CVR8 20×9″ Blank ET20–35 Brushed Titanium678.50€ VAT included
Eibach
Eibach Pro-Kit single spring, rear axle - MITSUBISHI Outlander III (F11-60-018-02-RA)155.76€ VAT included
Eibach
Eibach Pro-Spacer wheel spacers 40 mm per axle, 5x114,3, hub bore 64 mm, system 4, black (S90-4-20-052-B)245.44€ VAT included
Concaver
Concaver CVR8 20×9.5″ Blank ET10–41 Matt Black708.00€ VAT included
Concaver
Concaver CVR1 19×9″ Blank ET20–51 Platinum Black560.50€ VAT included
Ulter Sport
Ulter Sport Universal silencer, NRS (NRS141/30L)236.00€ VAT included
Motordrome Design
Central Mask Opel Astra H 5-doors (2004-2009)118.04€ VAT included
Motordrome Design
Front Splitter Ford Fiesta Mk8 ST / ST-Line (2017-2021)157.72€ VAT included
Ulter Sport
Ulter Sport Rear silencer for Audi A3 typ 8P HATCHBACK 3D 2003-2012, Ø70 mm, round, 2 tailpipes (101-203/70RS)324.25€ VAT included
Ulter Sport
Ulter Sport Universal silencer, NRS (NRS255/12-1)300.45€ VAT included
Milltek
Milltek Sport BMW E90/E92 M3 - V2 Valved System with Polished Tips (SSXBM1408)3,722.13€ VAT included
Remus
Remus Cat-Back System L/R for VW Golf 7 AU & Seat Leon — Racing Sport Silencer (Race)988.84€ VAT included
Ulter Sport
Ulter Sport Universal silencer, NRS (NRS130/07)255.83€ VAT included
Ramair
Ramair Induction Kit - Honda Civic Type R 22+ (JSK-300-BK)364.66€ VAT included
Ramair
JS-070-SL-KIT 70mm OD Neck Silver Large Aluminium Base Cone Filter With Silicone Coupler91.34€ VAT included
Akrapovic
Akrapovič Rear Carbon Fibre Diffuser for Volkswagen Golf (VII) GTI (DI-VW/CA/1)1,298.00€ VAT included
VAT included. Shipping calculated at checkout
Product Code: HGICSU01
Availability may change.
There are no reviews for this product.
This upgrade intercooler for the Subaru WRX STI is a highlight of the HF-Series range. The high-quality BNP core has excellent cooling properties to deliver top performance even in poor conditions while being very robust. It is highly resistant and does not heat up as much itself as comparable cores from other manufacturers. At the same time, the entire system is also designed for the best possible flow. This means that the pressure loss is minimal and the entire charge-air path has been developed for optimum flow using CAD flow analyses. This also includes the end tanks, which are made of high-strength cast aluminium. The advantages of this product are: - significantly cooler charge air, which improves the engine’s combustion - earlier response - improved flow. This product is therefore interesting for both standard power and motorsport, as much higher outputs are also possible. Each individual intercooler was built on the respective vehicle, calculated in flow simulations and tested on our in-house dyno. Technical details Core type: BNP Length: 530mm (core) / 630mm (with bracket) Height: 185mm (core) / 300mm (with end tanks) Depth: 100mm (core) / 130mm (with flange) Core volume without end tanks: 11.66 cm³ Parts certificate under §19.3: no Scope of delivery - Intercooler - Fitting kit Intercooler measurement OEM: 186.4 cfm HF-Series: 238.3 cfm 28% more air mass What exactly does an upgrade intercooler do for you? To express the exact additional power of an intercooler in figures, many unknown factors have to be taken into account, such as: power variation from the factory, other hardware modifications and the software used for the measurement. This differs from vehicle to vehicle. As a rule of thumb, on tuned engines you can expect up to 5% - 10%. But what is at least as important: whether your engine is already optimised or is to remain standard in terms of software, you prevent a loss of power, especially at high outside temperatures, or even reaching the temperature protection stored in many ECUs, and can therefore always count on your engine’s full power. Recommendation: use our HF-Series intercoolers as a combination of hardware & software optimisation. Reducing the back pressure (relieving the turbocharger) and cooling the charge air (more oxygen in the combustion chamber + thermal relief) results in a performance tune that makes efficient use of the potential of any turbocharged engine. When you look into hardware or software tuning of your vehicle, you must not ignore the factor “boost pressure loss” either. If you increase your vehicle’s power with chip tuning, the boost pressure is also raised in 99% of cases. With the standard intercooler, the boost pressure loss rises exponentially. This means that the turbocharger has to work even harder and the thermal load on it rises, which shortens its service life, or the turbocharger wears faster due to high speeds. With our HF-Series intercoolers we strike the perfect balance between cooling effect and boost pressure loss.
TÜV / ABE available upon request
We currently ship within Europe only.
If a part is not available, we will contact you with an estimated wait time.
If you wish to return a product after receiving it, we offer a 14-day returns policy. Custom-made products are not eligible for return, and return shipping is at the customer's expense. Full delivery and returns terms are on the “Delivery Information” page — the link is at the bottom of the page.
Products come with a warranty, detailed in a certificate included in the box.
To make a valid claim, you must prove the damage was not caused by you and that the warranty certificate is valid.
Full terms are on the “Terms & Conditions” page — the link is at the bottom of the page.