KW
KW Height-adjustable springs BMW (253200AN)887.36€ VAT included
KW
KW Height-adjustable springs BMW (253200AN)887.36€ VAT included
Vossen
Vossen HFX-1 17×8,5″ 6x130 ET35 Terra Bronze883.82€ VAT included
ST
ST Spring distance kit (68530121)88.25€ VAT included
Eibach
Eibach ERL OE replacement spring, front axle - MERCEDES-BENZ C-Class, MERCEDES-BENZ E-Class ... (R10468)95.58€ VAT included
Milltek
Milltek Sport Resonated (Quieter) GPF/OPF-Back Exhaust System with Carbon Jet-90 Trims (SSXBM1105)1,900.04€ VAT included
Maxton Design
Maxton Design Street Pro Rear Side Splitters V.2 for BMW 1 F20 M-Pack M140i (BM1F20FMCNC-RSD2B)68.44€ VAT included
Vogtland
Vogtland lowering springs 30/30 mm - Audi S3, type 8Y/GY, Quattro, sedan, incl. Sportback (956109)360.43€ VAT included
JR Wheels
JR Wheels JR28 17×7″ 5x100 ET35 Hyper Black230.10€ VAT included
Vossen
Vossen HFX-2 20×11″ 5x115 ET-6 Gloss Black1,131.62€ VAT included
KW
KW Coilover suspension V3 VW (35280065)2,322.24€ VAT included
HG Motorsport
HG Motorsport Stainless steel clamp 13mm band width (HGVASS6080M)3.77€ VAT included
V-MAXX
V-MAXX Lowering springs PEUGEOT 308 STATIONWAGON (P5) (35 PE 184)170.10€ VAT included
JR Wheels
JR Wheels JR36 19×9.5″ 5x120 ET35 Silver Brushed Face365.80€ VAT included
KW
KW Coilover suspension V1 (10281047)1,509.22€ VAT included
HG Motorsport
HG Motorsport Holts Fire Gum - assembly paste for exhaust systems (HGMTTLFGM)5.90€ VAT included
Maxton Design
Maxton Design Spoiler CSL Look BMW 5 Sedan F10 / F10 Facelift (BM-5-10-CSL-H1G)142.83€ VAT included
Motordrome Design
Rear Splitter Renault 5 E-Tech167.64€ VAT included
Eibach
Eibach B12 Pro-Kit complete suspension kit BMW 3 Series Cabriolet E30 (E90-20-007-09-22)1,128.08€ VAT included
Milltek
Milltek Sport Alpine A110S 1.8TCe (S Models) - Cat-back with Cerakote Black GT-90 Tips (SSXRN427)2,210.25€ VAT included
Ragazzon
Ragazzon Stainless steel rear silencer with round tail pipe 2x80 mm staggered (50.0276.26)666.70€ VAT included
VAT included. Shipping calculated at checkout
Product Code: HGICKPSLLK01
Availability may change.
There are no reviews for this product.
This upgrade intercooler for the Ford Fiesta ST 180 is a highlight of the HF-Series range. The high-quality HFT core has excellent cooling properties to deliver top performance even in poor conditions while being very robust. It is highly resistant and does not heat up as much itself as comparable cores from other manufacturers. At the same time, the entire system is also designed for the best possible flow. This means that the pressure loss is minimal and the entire charge-air path has been developed for optimum flow using CAD flow analyses. This also includes the end tanks, which are made of high-strength cast aluminium. The advantages of this product are: - significantly cooler charge air, which improves the engine’s combustion - earlier response - improved flow. This product is therefore interesting for both standard power and motorsport, as much higher outputs are also possible. Each individual intercooler was built on the respective vehicle, calculated in flow simulations and tested on our in-house dyno. Technical details Length: 600mm (core) Height: 360mm (core) Depth: 40mm (core) Core volume without end tanks: 10.67 cm³ Area: 213.5cm², standard 89.7 cm² Core: HFT Incl. Parts certificate for easy registration under §19.3 What exactly does an upgrade intercooler do for you? To express the exact additional power of an intercooler in figures, many unknown factors have to be taken into account, such as: power variation from the factory, other hardware modifications and the software used for the measurement. This differs from vehicle to vehicle. As a rule of thumb, on tuned engines you can expect up to 5% - 10%. But what is at least as important: whether your engine is already optimised or is to remain standard in terms of software, you prevent a loss of power, especially at high outside temperatures, or even reaching the temperature protection stored in many ECUs, and can therefore always count on your engine’s full power. Recommendation: use our HF-Series intercoolers as a combination of hardware & software optimisation. Reducing the back pressure (relieving the turbocharger) and cooling the charge air (more oxygen in the combustion chamber + thermal relief) results in a performance tune that makes efficient use of the potential of any turbocharged engine. When you look into hardware or software tuning of your vehicle, you must not ignore the factor “boost pressure loss” either. If you increase your vehicle’s power with chip tuning, the boost pressure is also raised in 99% of cases. With the standard intercooler, the boost pressure loss rises exponentially. This means that the turbocharger has to work even harder, so the thermal load on the turbocharger rises and its service life falls, or it wears faster due to high speeds. With our HF-Series intercoolers we strike the perfect balance between cooling effect and boost pressure loss. (The development and sales partner for this product is PS-Motorsport)
TÜV / ABE available upon request
We currently ship within Europe only.
If a part is not available, we will contact you with an estimated wait time.
If you wish to return a product after receiving it, we offer a 14-day returns policy. Custom-made products are not eligible for return, and return shipping is at the customer's expense. Full delivery and returns terms are on the “Delivery Information” page — the link is at the bottom of the page.
Products come with a warranty, detailed in a certificate included in the box.
To make a valid claim, you must prove the damage was not caused by you and that the warranty certificate is valid.
Full terms are on the “Terms & Conditions” page — the link is at the bottom of the page.