HG Motorsport TCC01 - 1-channel type K converter to ANALOG / DTM 3-pin (CC22903)

Thermocouple converter (TCC01) with mating connector. The TCC01 is a so-called “thermocouple amplifier” - i.e. a device that amplifies and converts the signal of a type K sensor - our simple thermocouple converter. With our TCC01 you can, for example, connect your exhaust gas temperature sensor very easily: plug the type K probe into the converter on one side and on the other side use the DTM connector for the 5V power supply, ground and the signal for your ECU or data display. Features of the TCC01: reliable thermocouple amplifier Cold-junction-compensated type K input DTM06-3S connector Standard mini thermocouple connector Retaining tab for mounting with M6 screw or cable tie Linear temperature curve from 0-1000°C Scope of delivery: TCC01 in housing DTM connector with lock 3 pins for crimping yourself 3 pre-crimped connection cables Support for a wide range of devices: any device with an analogue input for 0-5V signals can be used as a receiver - e.g.: AEM Ecumaster Emtron DTAfast Haltech LinkECU KMS van Kronenburg MaxxECU MBE Megasquirt Motec Syvecs VEMS But the type K converter can be used not only for exhaust gas temperatures. Also for liquids (1mm thermocouples) and gases (0.5mm thermocouples). Technical data Only 180uA current consumption Very fine resolution of 4mV per °C Calibration: 0V = 0°C (32°F) and 5V = 1250°C (2282°F) Accuracy: maximum 2% deviation Internal cold-junction compensation For measuring gases, liquids and other media Supports various type K elements (also 0.5, 1, 3 and 5mm diameter) Installation. Installing the TCC01 thermocouple converter (thermocouple amplifier) is easy. It should be placed in a dry and not too hot place, for example behind the bulkhead. You can use the integrated tab for mounting. Thanks to the special design, further TCC01 units can be mounted side by side. For maximum fixing, you can attach the supplied tab to the TCC01 module with superglue. Our displays are preconfigured for connecting the TCC01. To do this, connect the signal to AIN2. Multiple TCC01 modules. Often, however, you need two or more modules, for example with twin-scroll turbo manifolds. Here you can simply plug the modules into each other. Of course, when using several type K probes you can also opt for our TCCXX and write the readings directly to the CAN bus. These are available as TCC04, TCC06, TCC08 and TCC10.

TÜV / ABE available upon request

We currently ship within Europe only.

If a part is not available, we will contact you with an estimated wait time.

If you wish to return a product after receiving it, we offer a 14-day returns policy. Custom-made products are not eligible for return, and return shipping is at the customer's expense. Full delivery and returns terms are on the “Delivery Information” page — the link is at the bottom of the page.

Products come with a warranty, detailed in a certificate included in the box.

To make a valid claim, you must prove the damage was not caused by you and that the warranty certificate is valid.

Full terms are on the “Terms & Conditions” page — the link is at the bottom of the page.