Maxton Design
Maxton Design Front Splitter V.2 Volkswagen Passat B7 (VW-PA-B7-FD2G)197.38€ VAT included
Maxton Design
Maxton Design Front Splitter V.2 Volkswagen Passat B7 (VW-PA-B7-FD2G)197.38€ VAT included
Eibach
Eibach Pro-Kit lowering springs AUDI A8 (D2) (E1533-240)518.02€ VAT included
Maxton Design
Maxton Design Rear Side Splitters Audi A6 / A6 C7 S-line/ S6 C7 Facelift (AU-S6-C7F-AV-FRSD1FP)156.72€ VAT included
Concaver
Concaver CVR7 19×9″ Blank ET20–51 Double Tinted Black560.50€ VAT included
Maxton Design
Maxton Design Street Pro Side Skirts Diffusers Ford Focus RS Mk3 (FOFO3RSCNC-SD1B)167.63€ VAT included
Concaver
Concaver CVR3 20×10″ 5x112 ET35 Platinum Black737.50€ VAT included
JR Wheels
JR Wheels JR23 19×8.5″ 5x114.3 ET35 Gloss Black365.80€ VAT included
JR Wheels
JR Wheels SL-03 19×9.5″ Blank ET20–35 Gold401.20€ VAT included
Maxton Design
Maxton Design REAR SIDE SPLITTERS VOLKSWAGEN JETTA MK6 SEDAN PREFACE (VW-JE-6-RSD1G)197.38€ VAT included
Maxton Design
Maxton Design Side Skirts Diffusers V.1 Skoda Superb Mk4 (SK-SU-4-SD1G)197.38€ VAT included
Vogtland
Vogtland coilover kit, adjustable damping - VW Scirocco, type 13 (967096)1,302.55€ VAT included
Ragazzon
Ragazzon Stainless Steel Bend Aisi 304 - lenght 300 mm - outer diameter 63,5x1,5 mm - 90° (02501101)47.20€ VAT included
Remus
Remus OPT Titanium Tailpipe Set (100mm)672.60€ VAT included
JR Wheels
JR Wheels JR3 17×9″ Blank ET20–35 Custom Finish348.10€ VAT included
JR Wheels
JR Wheels SL-01 20×10″ Blank ET15–48 Custom Finish654.90€ VAT included
JR Wheels
JR Wheels JR10 15×7″ Blank ET30 Silver Machined Face188.80€ VAT included
Eibach
Eibach ERL OE replacement spring, rear axle - AUDI A3 / S3 / RS3 Sportback, AUDI A3 / S3 (R10207)95.58€ VAT included
KW
KW Springs Yamaha (25002107)296.49€ VAT included
JR Wheels
JR Wheels JR38 20×8.5″ Blank ET20–45 Matt Bronze424.80€ VAT included
V-MAXX
V-MAXX Lowering springs MERCEDES-BENZ C-CLASS STATIONWAGON (W204) (35 MB 104)169.65€ VAT included
VAT included. Shipping calculated at checkout
Product Code: HGDPFO03-1
Availability may change.
There are no reviews for this product.
Would you like to achieve more power with your turbocharged engine while at the same time relieving your turbocharger? Then you should start with this Bull-X product! The downpipe plays a decisive role in pulling power and performance. It is the “link” between the turbocharger and the exhaust system. The larger the pipe diameter and the higher the flow capacity of the downpipe, the more easily the turbocharger can discharge the spent exhaust gases through the exhaust system. This has a positive effect on torque and power. The advantages at a glance: • the turbocharger can discharge the exhaust gases more easily, resulting in more power • more torque, as the turbocharger reaches speed faster and is not slowed down • lower exhaust gas temperature, which relieves the manifold & turbocharger • thanks to the OEM connection, fitting is “plug and play” This item is not approved for use on public roads - For racing purposes only! CAUTION! All catalytic converters/cat replacement pipes offered, except the EC-tested catalytic converter from HJS, are not approved under the German road traffic regulations! Only with the EC catalytic converter may you legally drive your vehicle on public roads. The use of all other catalytic converters is intended for racing purposes only. If, despite our notice, you fit a downpipe with a catalytic converter WITHOUT EC approval, you are committing a criminal offence. Possible consequences include: invalidation of the operating licence, decommissioning of the vehicle, a complaint for tax evasion, and possible investigations by the environmental authority Catalytic converter information If you select a downpipe without a cat or with a 100/200-cell cat, the control unit may log an error message from the post-cat lambda sensor; this does not restrict driving, as the first lambda sensor is still there for engine management. The post-cat sensor is only responsible for monitoring the cat’s effectiveness. This can be programmed out by a chip tuner by adapting the software. Most vehicles up to the Euro 3 emissions standard have no post-cat oxygen sensor, and installation is possible without further adaptation and without error messages. The washcoat content of HJS ECE and EOBD cats is significantly higher and is characterised by a very high oxygen storage capacity, which means error messages can be avoided. The EOBD cats have been tested for this up to Euro 4. Durability and use up to the Euro 6 emissions standard are of course guaranteed. On Euro 5/6 vehicles, the points mentioned above can only be avoided if a cat with ECE approval is selected. For more information on emission classes and how a catalytic converter actually works, please click here.
TÜV / ABE available upon request
We currently ship within Europe only.
If a part is not available, we will contact you with an estimated wait time.
If you wish to return a product after receiving it, we offer a 14-day returns policy. Custom-made products are not eligible for return, and return shipping is at the customer's expense. Full delivery and returns terms are on the “Delivery Information” page — the link is at the bottom of the page.
Products come with a warranty, detailed in a certificate included in the box.
To make a valid claim, you must prove the damage was not caused by you and that the warranty certificate is valid.
Full terms are on the “Terms & Conditions” page — the link is at the bottom of the page.